Gotoh Locking Tuners |
|
Removing Old Strings |
|
| 1. Pull string back from tuning gear. | |
| 2. Turn tuner clockwise until string automatically releases. | |
3. Cut string in half and pull out of body. * * Do not release tension of all strings on X-bridge trem guitar. Bridge may snap back and damage finish! |
|
Installing
new strings |
|
| 1. Pull string tight through bridge hole | |
| 2. Pull string through tuner hole leaving no slack in the string. |  |
| 3. Turn tuner counter-clockwise, tuner will automatically pinch and tighten string. (We recommend using a string winder) | |
| 4. Tighten to pitch. | |
| 5. Cut string ends as close as possible to tuner. | |
| 6. Stretch strings by holding string down at first fret and stretching the string with other hand. |  |
| 7. Tighten to pitch again. | |
